l Propel Star Wars Drone Review: The Drones You’re Looking For
itMYti.com < New IT WebNews
Category: review    |    Added: 2016-12-22 19:50:05    |    View: 491

A long time ago, in a movie studio far, far away, George Lucas secured the merchandising rights to the Star Wars franchise, thus launching 40 years of branded figurines, lunchboxes, bedsheets, and waffle makers. Like the movies themselves, some gadgets have been great, and some have been terrible (remember the Darth Vader Potato Head?). Fortunately, Propel's Star Wars drones ($199) fall into the former camp; these flying machines not only look better than the other Star Wars-branded drones out there, but they perform better and have lots of fun features — including the ability to fight in battles.

They're also $199 each, making them at least twice as expensive as other flyable TIE fighters and X-Wings (such as those from Air Hogs). But Propel's versions are worth it.

Propel Star Wars Drones: Dogfights in Space

Design: Very Realistic

This is one box you won't want to throw in the trash compactor. Each drone comes in a collector’s edition-style box that holds a few surprises. Lift off the top, and the drone is revealed inside a clear plastic case that lights up and starts playing tracks from Star Wars. It's as dramatic as the opening crawl from the movies.

Underneath are a few other boxes containing the controller, rotors, rotor cage, charger and two batteries.

We received all three Propel drones: the TIE Advanced x1, the X-Wing Fighter and the Speeder Bike. All three are have a high level of detail, down to little bits of battle damage and space wear. For the purposes of this review, I used the TIE fighter, which I think looks the best of the three. The drone is studded with white, blue and red LEDs, a translucent canopy and subtle shading on all sides.

Credit: Jeremy Lips / Tom's GuideCredit: Jeremy Lips / Tom's GuideUniquely, the drones' rotors are located on the underside of each, rather than on top, as with most other drones. This reverse propulsion system has the effect of hiding the rotors to some degree, though they're most obvious on the X-Wing and Speeder bike, both of which have extra protrusions that make them look less like the real thing. The TIE fighter's rotors blend in more naturally. The one downside to this is that you’ll need to launch the drones from a hard surface and not, say, from a patch of grass. Don't try catching it midair, either.

In the front of each drone are two IR transmitters that are used when flying combat missions against other Propel Star Wars drones. The IR blasters can be swapped out for lasers, which will be released by early 2017. The lasers look far cooler (the TIE fighter has green lasers, and the X-Wing has red lasers, just like the movies), especially if you have a fog machine, and are more precise than the IR transmitters.

Credit: Jeremy Lips / Tom's GuideCredit: Jeremy Lips / Tom's GuideEach drone can easily fit in the palm of your hand and weighs less than 1 pound, so you don't need to register them with the FAA.

The one thing I wish these drones had was a small camera; it would be great to see a first-person view of a TIE fighter/X-Wing dogfight.

Controller: Star Wars Sounds Built In

The controller, while comfortable, is larger than the drone itself, and is customized to each drone. For example, the TIE fighter's controller is black with red accents, while the X-Wing's controller is white. Each controller requires four AA batteries — remove the cover, and the controller plays a humorous message, which I won’t spoil for you.

Credit: Jeremy Lips / Tom's GuideCredit: Jeremy Lips / Tom's GuideEach controller also comes with its own set of sound effects and music — the TIE Fighter's plays selected Imperial tracks, natch. That's fun, but it can be distracting, especially when you’re first learning to pilot the drone. Fortunately, you can lower the volume or turn the sound off entirely.

On the controller are two joysticks, four shoulder buttons and four more buttons in between the joysticks. The front of the controller also has a retractable arm to hold a smartphone. Propel plans to launch a smartphone app that will add additional features, such as games you can play with other Propel drones.

You'll definitely want to read the instruction manual before flying off to blast some womp rats; although the controls are intuitive enough, you'll want to learn which button starts and stops the drone, and which one(s) make it flip in the air.


For the young padawan, a training mode limits the speed and altitude of the drone, which I found very helpful when trying to figure out how to fly the thing.

Two of the shoulder buttons cause the drone to perform a 360-degree roll, while another lets you fire the IR blaster or lasers; another changes the speed settings.

In advanced mode, the drone has three speed settings. At top speed, the TIE fighter could probably make the Kessel Run in less than 12 parsecs (about 35 miles per hour, according to Propel). In fact, the TIE fighter comes with a second set of wing panels that makes it even speedier; you'll want to save this option for outdoors.

Credit: Nick Bush / Tom's GuideCredit: Nick Bush / Tom's GuideRegardless of whatever speed setting you select, you'll want to keep the TIE fighter at least six feet off the ground. I found that when flying it in a straight line, the drone had a tendency to nose down, driving it toward the ground.

After pressing the launch button, the controller said "TIE Fighter ready for launch," and the drone powered on, hovering about 3 feet in the air. It was pleasingly responsive and stable, even as I zipped it around the Tom's Guide offices. I could easily buzz my co-workers without fear of giving them an impromptu haircut. Piloting this drone was just like flying Beggar's Canyon back home. Still, you want to be careful, as stiff breezes can easily move these lightweight fliers around.

Other Star Wars-branded drones, such as the Air Hogs Millennium Falcon (which are admittedly less expensive), took a bit more finesse to keep airborne; I had to work to keep it hovering, whereas the Propel drone would stay largely in one place.

Air-to-Air Combat

If you are lucky enough to have a friend who also has $200 to spare, you can recreate the battle of Scarif in your backyard. As mentioned, each drone comes with IR transmitters and receivers. In Combat mode, you can pilot your drone against other Propel Star Wars drones; three "hits" from an enemy’s IR transmitter causes a drone to fall to the ground (gently). When my TIE fighter was hit, the drone wobbled a little in the air, and the controller vibrated, letting me know I’d sustained some damage. It’s a great interactive feature.

Credit: Jeremy Lips / Tom's GuideCredit: Jeremy Lips / Tom's GuideYou'll definitely want to practice on your own before taking on your friends (or enemies). Although easy to maneuver, targeting an enemy drone is like "trying to hit a bullet with a smaller bullet whilst wearing a blindfold, riding a horse," to quote Scotty from Star Trek. You'll also want a lot of room, too — best to take them outside, or you will be running into walls and ceilings in no time.

Coming Soon to a Drone Near You

At the time of this review, there were a number of features that were not yet available. In the near future, you'll be able to swap out the IR transmitters with little lasers (estimated at around $40 for the kit), which will make hitting your opponent's drone harder, but will look far cooler — especially if you have a fog machine.

Additionally, Propel will release an iPhone app, which will allow you to connect with other pilots, fight virtual battles against them and show your ranking versus others.


Each drone comes with 12 pairs of rotors, so you'll have plenty of spares. The rotors pop off easily using an included tool. The motors are also replaceable (they plug into the main circuit board), but you'll have to pop open the entire drone, which involves removing about 15 screws. Conveniently, a small screwdriver comes with the controller.

While made out of somewhat flexible plastic, the TIE fighter's side panels are a little flimsy; I cracked one of them after a particularly hard landing.

Battery Life

I was able to get about 10 minutes of flight time — including crashes — out of the TIE fighter's battery before needing to recharge it. I like that you get two batteries with the drone; that way, I could recharge one while using the other. (It takes about 15 minutes to recharge each battery.)

Bottom Line

A long time have I watched, waiting for a great Star Wars drone. Propel's TIE Advanced, X-Wing and Speeder bike not only work well as drones, but all the little Easter eggs — dialogue and music from the movies — are great treats for Star Wars' fans. The fact that you can do battle with up to 12 of these drones at once only adds to the fun. They may cost as much as a ticket to Alderaan, but they'll give you a helluva ride along the way.

source: Tomsguide
Category: news    |    6 hours ago    |    View: 141

Airports, hotel rooms and rental cars pose unseen privacy risks. Here's what to do.

Category: news    |    7 hours ago    |    View: 6

The Google Play store is no stranger to seemingly legitimate apps that host malware, but McAfee researchers have discovered something a bit different: three malicious applications that target specific individuals. The security group says a North Korea-linked group uploaded the&hellip;

Category: news    |    8 hours ago    |    View: 4

After a number of frustrating delays, Nvidia’s first G-Sync, high refresh rate, HDR monitors are almost upon us. The first of these, The Predator X27, is already up for preorder. We always knew that it would put a big hole&hellip;

Category: news    |    10 hours ago    |    View: 18

Here are the biggest games to expect from E3 2018, including Super Smash Bros., Spider-Man and The Last of Us II.

Category: news    |    11 hours ago    |    View: 7

Rumor has it that iOS 12, due to be announced at Apple's annual Worldwide Developers Conference on June 4, will have a reduced scope as Apple tries to focus on improved security and reliability. Still, hope springs eternal — and for those of us who are dr

Category: news    |    1 day ago    |    View: 155

The strongest man in Harlem is back, but his might may not be enough to make it past the critical public eye and a new foe.

Category: review    |    2 days ago    |    View: 39

OnePlus looks like it's produced another budget-beating phone with the OnePlus 6. But how does it stack up against Apple's iPhone X?

Category: news    |    2 days ago    |    View: 144

It seems Google isn't willing to let Microsoft take the lead in the realm of augmented reality (AR).

Category: news    |    2 days ago    |    View: 10

Back in March, we got word that Hello Games would be releasing a massive update for No Man’s Sky this summer called “NEXT.” Billed as “the biggest ever,” Sean Murray was vague with the release date and details. However, it&hellip;

Category: news    |    2 days ago    |    View: 8

Cinematographer Phil Holland not all that long ago took delivery of the first Shootover K1 Hammerhead 6-axis gyro stabilized gimbal which allows for multiple cameras to be lined up and used in a panoramic array. He promptly put the rig&hellip;

Download Latest PC Softwares

Category: design    |    Added: 4 hours ago    |    View: 2
Digipara Lift Designer 5.2 Premium Suite Download - downloadwise.com

Digipara Lift Designer 5.2 Premium Suite Download Latest Version for Windows. It is full offline installer standalone setup of Digipara Lift Designer 5.2 Premium Suite for 32/64.

Digipara Lift Designer 5.2 Premium Suite is a handy application for design and construction drawing for the lift. This application is able to design the different types of traction and hydraulic elevators and can map them to be traced. In this age of standardization and process optimization, elevator manufacturers all around the world use the Digipara Liftdesigner to fully automate their drawings. You can also download AutoCAD Raster Design 2019.

Category: 3d-cad    |    Added: 11 hours ago    |    View: 3
KISSsoft 2017 Free Download - downloadwise.com

KISSsoft 2017 Free Download Latest Version for Windows. It is full offline installer standalone setup of KISSsoft 2017.

KISSsoft 2017 is an excellent software which can be used for calibration, optimization and calculation of the machine parts. With this software you can easily perform the re-analysis of the machine parts and the components such as gears, shafts, screws, bearings and movable cables etc. You can also download GibbsCAM 2016.

Category: chasm-consulting-pumpsim-premium-free-download    |    Added: 19 hours ago    |    View: 2
Chasm Consulting PumpSim Premium Free Download - downloadwise.com

Chasm Consulting PumpSim Premium Free Download Latest Version for Windows. It is full offline installer standalone setup of Chasm Consulting PumpSim Premium.

Chasm Consulting PumpSim Premium is an effective software which can be used to design, model, optimize and simulate a fluid pump system. This software is interactive and based on the 3D technology which is used in Ventsim Software. You can easily design and simulate different plumbing systems and pumping systems.

Category: development    |    Added: 20 hours ago    |    View: 1
Advanced Installer Architect 14.5 Build 83044 Download - downloadwise.com

Advanced Installer Architect 14.5 Build 83044 Download Latest Version for Windows. It is full offline installer standalone setup of Advanced Installer Architect 14.5 Build 83044.

Advanced Installer Architect 14.5 Build 83044 is a handy application that has got a complete set of tools in order to let the developers build Windows Installer packages. It provides you a clean and intuitive environment and though it has got loads of dedicated parameters yet the interface is still very straightforward. You can also download Inno Setup Compiler.

Category: circuit-designing    |    Added: 21 hours ago    |    View: 1
PC SCHEMATIC Automation Free Download - downloadwise.com

PC SCHEMATIC Automation Free Download Latest Version for Windows. It is full offline installer standalone setup of PC SCHEMATIC Automation for 32/64.

PC SCHEMATIC Automation is a handy application for mapping the electrical circuits. You can draw the wiring diagram on a paper for a small house but when it comes to an industrial building as well as complex installations you need to have an application like PC SCHEMATIC Automation You can also download AutoCAD Electrical 2018.

Category: development    |    Added: 1 day ago    |    View: 5
Allround Automations PL / SQL Developer Download - downloadwise.com

Allround Automations PL / SQL Developer Download Latest Version for Windows. It is full offline installer standalone setup of Allround Automations PL / SQL Developer

Allround Automations PL / SQL Developer is an IDE( Integrated Development Environment) which is developed to develop the application units stored for Oracle Database. With the time passing we are now seeing business logics and moving to the Oracle’s Server so this software has become an integral part of the overall development process. You can also download SQL Server 2014 Developer Edition.

Category: download-managers    |    Added: 1 day ago    |    View: 2
save2pc Ultimate 5.5.3 + Portable Free Download - downloadwise.com

save2pc Ultimate 5.5.3 + Portable Free Download Latest Version for Windows. It is full offline installer standalone setup of save2pc Ultimate 5.5.3 + Portable.

Internet is an ocean of information where you can have access to countless content in the form of videos. All these videos are of various different categories as well as genre. For accessing this huge pool of videos you need to be connected to the Internet but if you have no access to the Internet then you are required to have a software application which will allow you to access the videos offline and save2pc Ultimate 5.5.3 + Portable is one of them. This application allows you to download the videos from any of the famous video sharing websites like Facebook, YouTube, Dailymotion and Vimeo etc. You can also download Save2PC 5.3.5 Build 1493.